| 1 |
Dr. Krishna Kumar |
Technical Qualification of Copper-Tin Alloy (C90300 grade) Casting of Statue |
SHREE JIN KUSHAL SURI SEVASHRAM TRUST, KUSHAL VATIKA,BARMER |
4.56 |
2024-2027 |
| 2 |
Dr. Swati Sharma |
Hardness evaluation of nanocomposite coating |
R.S. Infra-Transmission Ltd. Jaipur |
9.50 |
2024-2025 |
| 3 |
Dr. Swati Sharma |
Development of ultra-high hardness steel through grain refinement for automotive and defence industries - A novel approach |
CRG - DST |
53.55 |
2024-2026 |
| 4 |
Dr. Kunal Borse |
EVALUATION OF ANTICORROSION PROPERTIES OF MILD STEEL COATED WITH WASTE FOUNDRY SAND FINES-REINFORCED EPOXY-BASED POLYMER MATRIX COMPOSITE |
The Institution of Engineers (India) |
0.36 |
2024-2024 |
| 5 |
Dr. Krishna Kumar |
Metallic content and Chemical compositional analysis of water & soil samples of Rajpura Dariba Mines of Hindustan Zinc Limited |
EURO SMILE FACILITY MANAGEMENT SERVICES PVT LTD Vikas Marg, Shakarpur, Delhi |
3.82 |
2024-2025 |
| 6 |
Prof. Rajendra Kumar Goyal |
Additive Manufacturing of Carbon Fibers/Rice Husk Ash Reinforced Polymer Nanocomposites for Aerospace Heat Sink |
ISRO |
0.96 |
2023-2023 |
| 7 |
Dr. Kunal Borse |
Synthesis and characterization of CZTSe thin film deposited by electroless plating method for solar cell applications |
INUP-i2i IIT Delhi |
0.00 |
2023-2023 |
| 8 |
Dr. Rajesh Kumar Rai |
Development of AlCoCrFeNiTi high entropy alloy for high-temperature aerospace applications |
ISRO-RACS |
24.83 |
2023-2025 |
| 9 |
Dr. Kunal Borse |
Development of a novel method for the synthesis of printable CIGS ink for solar photovoltaic application |
RAC-S ISRO |
0.81 |
2023-2023 |
| 10 |
Prof. Rajendra Kumar Goyal |
Development of Emerging Materials (FIST-2021) |
DST |
141.00 |
2022-2027 |
| 11 |
Dr. Tfgh Gfh Gfh |
sdaf |
sd |
34.32 |
2022-2022 |
| 12 |
Dr. Swati Sharma |
MORPHOLOGY CONTROL Effect of thermal processing on the morphology of as-milled powders of metal and metal alloys (iron, copper, and HEAs) – A Feasibility Study |
Scinomat Solution Pvt Ltd |
1.00 |
2022-2023 |
| 13 |
Dr. Sreekumar Vadakke Madam |
Novel Material Manufacturing method for Large Volume Cast Metal Matrix Nanocomposites (Ultra-Cast) |
Ministry of Mines |
50.50 |
2022-2024 |
| 14 |
Dr. Manjesh Kumar Mishra |
Assessment of Additive Manufactured Titanium Alloy and Cast Nickel-Aluminium-Bronze Alloy An Exploratory Study for Naval Propeller Material |
NRB, DRDO |
20.04 |
2022-2024 |
| 15 |
Prof. Upender Pandel |
The coating of CuNiFeCrMo-Graphene Oxide nanocomposites on CFRP- Carbon Fiber Reinforced Plastics/ Composites to improve thermal conductivity and electrical conductivity properties of CFRP |
ISRO |
25.00 |
2021-2024 |
| 16 |
Dr. Rajesh Kumar Rai |
Exploratory Study on Effect of Microstructure Evolution on Mechanical Strength of Superalloys |
GTRE, DRDO Bangalore |
24.60 |
2021-2023 |
| 17 |
Dr. Krishna Kumar |
The coating of CuNiFeCrMo Graphene oxide Nano composites on CFRP - Carbon Fiber Reinlbrced Plastics / Composites to improve Thermal Conductivity & Electrical Conductivity properties of CFRP |
ISRO Bangalore |
25.25 |
2021-2024 |
| 18 |
Dr. Ajaya Kumar Pradhan |
Combined effect of melt thermal treatment and grain modifier on hypoeutectic and hypereutectic aluminium-silicon alloy |
TEQIP-III |
2.30 |
2019-2020 |
| 19 |
Dr. Jyotirmaya Kar |
Tailor blank welding of interstitial free steel sheets by electron beam welding process |
TEQIP-III |
4.00 |
2019-2020 |
| 20 |
Dr. Sreekumar Vadakke Madam |
Fabrication of Metal Matrix Nano Composite for precision machining applications |
TEQIP |
2.00 |
2019-2020 |
| 21 |
Prof. Rajendra Kumar Goyal |
Development of Low Cost High Performance Polymer Matrix Nanocomposites for EMI/Microwave Absorption Applications |
TEQIP-III |
4.00 |
2019-2020 |
| 22 |
Dr. Vijay Navaratna Nadakuduru |
Synthesis of bulk submicrocrystalline Ni-Ti based shape memory alloys by Mechanical alloying and Spark Plasma Sintering |
Research Grant MNIT Jaipur TEQIP-III |
1.85 |
2019-2020 |
| 23 |
Dr. Rajendra Kumar Duchaniya |
Vetting of Design and Drawing Details for Balancing Well & Amp Outlet Well |
IVRCL lTD. |
1.10 |
2018-2018 |
| 24 |
Dr. Rajendra Kumar Duchaniya |
Testing of Reinforcement Steel for STP Works Electrotherm TMT 500 Grade Fe500 |
The Superintending Engineer, RUIDP, Phase-III, PIU-Bhilwara |
1.42 |
2018-2018 |
| 25 |
Dr. Rajendra Kumar Duchaniya |
Testing of Reinforcement Steel for STP Works JSW TMT 500 Grade Fe500 |
The Superintending Engineer, RUIDP, Phase-III, PIU-Bhilwara |
1.77 |
2018-2018 |
| 26 |
Dr. Jyotirmaya Kar |
Study on Dissimilar Joints Like Aluminium to Steel, Inconel to Ti-6Al-4V, and Zircaloy-4 to Steel Produced by High Energy Density Welding Processes Like EBW and LBW |
DST |
35.00 |
2018-2023 |
| 27 |
Prof. Upender Pandel |
Reducing power consumption Increasing the yield of the casting through induction melting. |
SHREE VAIBHAV METACAST PVT LTD Jaipur |
2.30 |
2017-2017 |
| 28 |
Prof. Rajendra Kumar Goyal |
Polymer/Ceramic Nanocomposites Substrate for Microwave Communication Applications |
Alumni-COEP |
1.50 |
2017-2018 |
| 29 |
Dr. Rajendra Kumar Duchaniya |
Tribological Studies of Electroless Ni-P-nano TiO2 Coating on the Steel Substrate |
DST Rajasthan |
3.25 |
2017-2020 |
| 30 |
Dr. Rajendra Kumar Duchaniya |
Testing of PCC Tiles |
IVRCL Limited |
0.59 |
2017-2017 |
| 31 |
Dr. Rajendra Kumar Duchaniya |
Testing of Reinforcement Bars-electro TMT 500 GRADE FE500 |
Consulting Engineer’s Group Ltd. (in association with Shri Kushalsuri Engineering Services Pvt. Ltd.) Banswara |
1.73 |
2017-2017 |
| 32 |
Dr. Rajendra Kumar Duchaniya |
Vetting of Clear Water Reservoir Strengthening Procedure Under Execution Of Works Related to Supply of Water From Jnarmada Canal Jaloredistrict for Jalore Town and 281 Villages Narmada FR WS Project |
IVRCL LIMITED |
1.77 |
2017-2017 |
| 33 |
Dr. Rajendra Kumar Duchaniya |
Testing of Stainless Steel Sheet |
Fast Kitchan Equipments |
0.58 |
2016-2016 |
| 34 |
Dr. Rajendra Kumar Duchaniya |
Vetting of Design & Amp Drawing of Cathodic Protection System for MS Pipeline Under Execution of Works Related to Supply of Water From Narmada FR WS Project |
PHED, (IVRCL) |
1.73 |
2016-2016 |
| 35 |
Dr. Vijay Navaratna Nadakuduru |
Novel synthesis and formability of ultrafine grained Ti-46Al-1B (at%) alloy |
SCIENCE AND ENGINEERING RESEARCH BOARD (SERB), DST |
36.43 |
2016-2020 |
| 36 |
Dr. Rajendra Kumar Duchaniya |
Quenching Behavior of Bottom-Flooded Molten Pool |
BRNS,BARC |
35.00 |
2016-2021 |
| 37 |
Dr. Sampad Kumar Biswas |
Effect of microstructure on shock behaviour of SiC ceramics for armor application |
DRDO |
38.00 |
2016-2019 |
| 38 |
Dr. Sampad Kumar Biswas |
DEVELOPMENT OF CERAMIC ARMOUR PANELS |
Min. Of Defence |
19.00 |
2015-2016 |
| 39 |
Dr. Rajendra Kumar Duchaniya |
Effective Teaching |
NITTTR Chandigarh |
1.71 |
2015-2016 |
| 40 |
Dr. Rajendra Kumar Duchaniya |
Mixing Of Silver With Iron |
SHREE KAUSHALYAS GEMS |
2.00 |
2015-2015 |
| 41 |
Dr. Vinod Kumar |
Economic production of iron through direct reduction of Mill Scale by low grade coal of Rajasthan |
Ministry of Steels |
166.00 |
2015-2018 |
| 42 |
Prof. Upender Pandel |
Improving the quality of Aluminum-Silicon alloys Automotive casting through Grain Refinement |
ALUCAST Pune |
1.00 |
2014-2015 |
| 43 |
Dr. Vinod Kumar |
Synthesis and characterization of high entropy alloys |
DST, Government of India |
17.86 |
2014-2017 |
| 44 |
Dr. Vinod Kumar |
Synthesis and environmental degradation study of multicomponent alloy for high temperature application |
BRNS |
16.15 |
2014-2017 |
| 45 |
Prof. Upender Pandel |
Effect of microstructure on shock behavior of SiC ceramics of armor application,DRDO |
DRDO |
38.00 |
2014-2018 |
| 46 |
Prof. Upender Pandel |
Development of MoSi2 heating rod element for high temperature furnace, Naskar and Company, Kolkatta |
NASKAR & Company Kolkata |
17.50 |
2013-2015 |
| 47 |
Prof. Rajendra Kumar Goyal |
Fabrication and characterization of Low Cost Novel Three-Phase Polymer Nanocomposites for Embedded Capacitors Applications |
AICTE |
20.00 |
2013-2016 |
| 48 |
Dr. Rajendra Kumar Duchaniya |
Synthesis of ZnO-CdO Nanocomposite for CO Gas Sensing |
DST Rajasthan |
0.11 |
2012-2013 |
| 49 |
Prof. Rajendra Kumar Goyal |
Development of High Performance Polycarbonate/ Graphite Nanocomposites with Low Percolation for EMI Shielding Application |
ISRO |
10.33 |
2011-2013 |
| 50 |
Dr. Rajendra Kumar Duchaniya |
Investigation of heat-transfer characteristic on nano-fluid in sub-cooled flow boiling |
BRNS,BARC |
17.00 |
2010-2015 |
| 51 |
Dr. Rajendra Kumar Duchaniya |
Testing of Gal-Volume Sheet |
Dhanshree construction DRM(Works) NWR, Jaipur |
0.17 |
2010-2010 |
| 52 |
Prof. Rajendra Kumar Goyal |
Fabrication and Electrical Properties of Low Cost High Performance Conducting Polymer Nanocomposites |
UGC |
10.88 |
2009-2012 |
| 53 |
Dr. Rajendra Kumar Duchaniya |
Synthesis and Characterization Study of Nano-Crystalline Ni-P Coating on Aluminium |
Institution of Engineers (India) |
0.60 |
2007-2008 |
| 54 |
Prof. Upender Pandel |
Development of lab for advance coating by Plasma and Laser techniques |
MHRD New Delhi |
9.00 |
1999-2002 |
| 55 |
Prof. Upender Pandel |
Development and Characterization of Continuous casting mould fluxes, AICTE New Delhi |
AICTE New Delhi |
5.00 |
1997-1999 |
| 56 |
Prof. Upender Pandel |
Microwave as a probe to Estimate Metal in its Ore through the Study of Particulate Behavior of Basic Electronic Materials, DST, Rajasthan |
DST Rajasthan |
2.88 |
1995-1998 |
